Wood Stoves Ventis<\/p>\n
\u25aaExtra-large wood stove on pedestal
\n\u25aaEPA certified at only 1.6 g\/h
\n\u25aaSolidity and manufacturing quality
\n\u25aaC-Cast heat shield added to the firestop \u25aaNon-catalytic combustion technology
\n\u25aaInstallation authorized on the Island of Montreal
\n\u25aaCast iron door
\n\u25aaTop heat deflector and side panels<\/p>\n
Appliance performance<\/p>\n
Fuel type Dry cordwood (16″ recommended)
\nRecommended heating area (9) 1,000 – 2,700 ft\u00b2
\nOverall firebox volume 3.5 ft\u00b3
\nEPA loading volume 2.88 ft\u00b3
\nMaximum burn time (9) 10 h
\nMaximum heat output-dry cordwood (4) 110,000 BTU\/h
\nMinimum overall heat output rate (4) (5) 17,200 BTU\/h (5.0 kW)
\nMaximum overall heat output rate (4) (5) 57,800 BTU\/h (16.9 kW)
\nAverage overall efficiency-dry cordwood (HHV) (5) (6) 71 %
\nAverage overall efficiency-dry cordwood (LHV) (5) (7) 76 %
\nOptimum efficiency (1) (2) 77 %
\nOptimum heat transfer efficiency (8) 75 %
\nAverage particulate emission rate (3) 1.6 g\/h
\nAverage CO (10) 73 g\/h
\n1. Performances based on a fuel load prescribed by the standard at 7 lb\/ft\u00b3 and with a moisture content between 19% and 25%.
\n2. Optimum overall efficiency at a specific burn rate (LHV).
\n3. This appliance is officially tested and certified by an independent agency.
\n4. The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb\/ft\u00b3 and 20 lb\/ft\u00b3. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb\/ft\u00b3 and 12 lb\/ft\u00b3. The moisture content is between 19% and 25%.
\n5. As measured per CSA B415.1-10 stack loss method.
\n6. Higher Heating Value of the fuel.
\n7. Lower Heating Value of the fuel.
\n8. The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance\u2019s ability to convert the energy contained in the solid fuels into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
\n9. Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
\n10. Carbon monoxyde.<\/p>\n
General Features<\/p>\n
Alcove installation approved Yes
\nMobile home approved Yes, with fresh air intake
\nCertified according to applicable standards CAN\/USA accredited laboratory
\nOverall dimension (Width) 28 3\/4″
\nOverall dimension (Height) 34 3\/4″
\nOverall dimension (Depth) 30 5\/8″
\nPremium quality blower included (CFM) Optional
\nCombustion technology Non-catalytic
\nStainless-steel secondary-air system Yes
\nFlue outlet diameter 6″
\nRecommended chimney diameter 6″
\nType of chimney CAN\/ULC S629, UL 103 HT (2100 \u00b0F)
\nMinimum chimney height 12′
\nDoor type Single, glass with cast iron frame
\nDoor opening size (Width) 19″
\nDoor opening size (Height) 9 1\/4″
\nGlass type Ceramic glass
\nGlass surface – W x H 18 3\/8″ x 11 1\/2″
\nSteel thickness-body 3\/16″
\nSteel thickness-top 5\/16″
\nFirebox size (Width) 22 7\/8″
\nFirebox size (Height) 12 3\/4″
\nFirebox size (Depth) 20 1\/8″
\nLog positioning Loading over width and over depth
\nMaximum log length 22″
\nFirebox lined with refractory bricks Yes
\nBaffle type High quality vermiculite
\nHigh-efficiency certified appliance Yes, EPA 2020 certified
\nCanadian Standard (emissions) CSA B415.1-10
\nUSA Standard (emissions) EPA
\nCanadian Standard (safety) ULC S627
\nUSA Standard (safety) UL 1482, UL 737
\nWarranty Limited lifetime<\/p>\n
Minimum clearances to combustibles*
\n(Data expressed in inches. 1 inch = 25.4 mm)<\/p>\n
| <\/th>\n | Canada<\/td>\n | United-States<\/td>\n<\/tr>\n | ||
|---|---|---|---|---|
| <\/th>\n | Single wall pipe<\/td>\n | Double wall pipe<\/td>\n | Single wall pipe<\/td>\n | Double wall pipe<\/td>\n<\/tr>\n |
| Clearances – Base of the unit to ceiling**<\/th>\n | 84″<\/td>\n | 84″<\/td>\n | 84″<\/td>\n | 84″<\/td>\n<\/tr>\n |
| Clearances – Corner<\/th>\n | 7 1\/4″<\/td>\n | 7″<\/td>\n | 7 1\/4″<\/td>\n | 7″<\/td>\n<\/tr>\n |
| Clearances – Back wall<\/th>\n | 13 1\/4″<\/td>\n | 14″<\/td>\n | 13″<\/td>\n | 14″<\/td>\n<\/tr>\n |
| Clearances – Side wall<\/th>\n | 14″<\/td>\n | 7″<\/td>\n | 14″<\/td>\n | 7″<\/td>\n<\/tr>\n |
| <\/td>\n<\/tr>\n | ||||
| *The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner’s manual, catalogues, flyers, magazines and\/or web sites).<\/p>\n **Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n","protected":false},"excerpt":{"rendered":" Wood Stoves Ventis \u25aaExtra-large wood stove on pedestal \u25aaEPA certified at only 1.6 g\/h \u25aaSolidity and manufacturing quality \u25aaC-Cast heat shield added to the firestop \u25aaNon-catalytic combustion technology \u25aaInstallation authorized on the Island of Montreal \u25aaCast iron door \u25aaTop heat deflector and side panels Appliance performance Fuel type Dry cordwood (16″ recommended) Recommended heating area […]<\/p>\n","protected":false},"featured_media":9504,"template":"","meta":{"inline_featured_image":false},"product_brand":[368],"product_cat":[193,205,202],"product_tag":[],"class_list":{"0":"post-9509","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_brand-ventis-en","7":"product_cat-stoves-fireplaces","8":"product_cat-wood-stoves","9":"product_cat-wood-stoves-fireplaces","11":"first","12":"instock","13":"taxable","14":"shipping-taxable","15":"purchasable","16":"product-type-simple"},"yoast_head":"\n |